# New AC Installation Checklist: Final Sign-Off

Use this central AC installation checklist to verify sizing, matched equipment, ducts, line set, electrical, drains, commissioning, permits, and warranties.

- Canonical: [https://aircondition.guide/guides/ac-installation-checklist](https://aircondition.guide/guides/ac-installation-checklist)
- Markdown: [https://aircondition.guide/guides/ac-installation-checklist.md](https://aircondition.guide/guides/ac-installation-checklist.md)
- Published: 2026-07-10
- Updated: 2026-07-10
- Author: Air Conditioner Guide Editorial Team

## Quick answer

A complete AC installation verifies load and equipment selection before work, protects the home and follows manufacturer instructions during work, then documents airflow, refrigerant charge, drainage, controls, safety devices, permit, AHRI match, and warranty at handoff. Do not make final payment from cold air alone.

Use this checklist to confirm deliverables, not to supervise technical procedures. Refrigerant, high-voltage, and combustion-adjacent work belong to qualified professionals.

## Before installation day

- [ ] Room-by-room Manual J completed.
- [ ] Manual S or equivalent equipment selection documented.
- [ ] Outdoor and indoor model numbers appear in the contract.
- [ ] AHRI reference is available.
- [ ] Refrigerant and required detection/mitigation components are identified.
- [ ] Duct, return-air, filter, and airflow corrections are written.
- [ ] Line-set replacement or reuse procedure is written.
- [ ] Electrical, condensate, controls, permits, removal, and finish work are assigned.
- [ ] Manufacturer parts and contractor labor warranties are attached.
- [ ] Payment milestones and change-order approval are clear.

Photograph access routes and nearby finishes. Move valuables and confirm how floors, landscaping, doors, and attic access will be protected.

## When equipment arrives

Compare delivered model numbers with the signed proposal before installation. Confirm cabinet condition and refrigerant labeling. A “comparable upgrade” should never be substituted without written approval and a new AHRI check.

Record model and serial numbers for:

- outdoor condenser;
- indoor coil or air handler;
- furnace if included;
- thermostat or communicating control;
- accessories such as zoning panels or dehumidifiers.

## Installation-scope observations

You do not need to judge brazing technique, but you can verify that contracted work exists:

- Equipment has the specified pad, clearances, and support.
- Line-set scope matches the contract.
- Outdoor wall penetrations are sealed and protected.
- Disconnect, whip, breaker, and surge protection match scope. See our [AC electrical safety guide](/guides/ac-electrical-safety) for what the disconnect location and GFCI scope should cover.
- Drain, trap, vent, pump, pan, secondary path, and overflow protection are present as specified.
- Filter access is practical and the size is labeled.
- Duct transitions are mechanically sound and sealed.
- Required refrigerant detection components are installed.
- Old equipment and debris are removed.

Raise differences while access is still open.

## Commissioning: the measurements that matter

ENERGY STAR identifies proper sizing, airflow, refrigerant charge, and duct evaluation as quality-installation essentials. Ask for a startup record that includes the manufacturer-required checks.

Useful documentation may include:

| Check | What it confirms |
|---|---|
| Total external static pressure | The blower is operating against acceptable resistance |
| Airflow setup | Delivered airflow aligns with equipment and comfort needs |
| Refrigerant charge method | Charge was verified under appropriate conditions |
| Temperature and pressure readings | The system's operating state at startup |
| Drain and safety test | Condensate leaves safely and switches respond |
| Control sequence | Stages, modulation, fan, sensors, and schedules work |
| Room airflow/balance | Distribution follows design targets |

The exact readings differ by equipment and weather. Ask the installer to explain what was measured and whether values met manufacturer specifications.

## Final sign-off package

Do not rely on documents being emailed later. Collect:

1. Final paid invoice with installed model and serial numbers.
2. Permit and passed inspection where required.
3. AHRI certificate.
4. Load calculation and equipment-selection summary.
5. Commissioning report.
6. Warranty registration confirmation.
7. Contractor labor warranty.
8. Manuals and maintenance requirements.
9. Filter size and replacement instructions.
10. Photos of concealed work when useful.

## Homeowner orientation

The installer should show how to change filters, use controls, switch modes, manage humidity settings, recognize overflow shutdowns, clear outdoor-unit space, and request service. Confirm which sounds and operating patterns are normal for staged or variable equipment.

## The first week

Watch runtime, humidity, drainage, room balance, noise, odors, and control alerts. A new system may need balancing or setting adjustments, but repeated breaker trips, water, ice, burning smells, or abnormal noise require prompt service.

If the installed system differs from the signed scope, document it and pause final acceptance until resolved. Our [quote review](/quote-review) can help you compare the agreement with the handoff.

## Frequently Asked Questions

### How long does central AC installation take?

A straightforward replacement may fit in a day, while ducts, electrical work, difficult access, controls, permits, or combined furnace work can require more time. Scope matters more than a universal estimate.

### Should I pay before the inspection?

Payment terms vary, but the contract should retain a meaningful final milestone until contracted work, required inspection, startup, and documents are complete.

### What if the model number delivered is different?

Pause and request a written explanation, specifications, warranty, and AHRI certificate. Approve substitutions only after verifying equal or better fit, not merely equal nominal tonnage.

## Sources

- [ENERGY STAR: HVAC Quality Installation](https://www.energystar.gov/saveathome/heating-cooling/hvac-quality-installation)
- [ACCA: Homeowner Guidance and Installation Checklist](https://www.acca.org/homes)
- [AHRI Directory of Certified Product Performance](https://www.ahridirectory.org/)
- [EPA: Section 608 Technician Certification](https://www.epa.gov/section608/section-608-technician-certification)